Anti-dumping on imports from China: what applies and how to check

Last updated: 9 November 2026.

If you import from China, you may owe anti-dumping duty on top of the normal duty without knowing it. This is what applies in 2026 and how to check it for your products.

Short answer

Anti-dumping duty is an extra charge on top of the normal import duty. It only applies to certain products from certain countries. Many product groups from China are under measures, sometimes higher than the product itself costs.

You can see if it applies to you in TARIC, under the 8-digit CN code with China as country of origin. If the right TARIC additional code of your supplier is not on the commercial invoice, you pay the highest rate.

What to do

  1. 1 Make a list of the CN codes you import most from China. Use your declarations of the last 12 months.
  2. 2 Look up each code in TARIC with China as country of origin.
  3. 3 If anti-dumping applies, ask your supplier for their additional code and for confirmation that their company is in the annex of the regulation.
  4. 4 Put that code on your commercial invoice. Adjust your invoice template for it.
  5. 5 Check your declarations of the last 3 months. If you find a mistake, report it to customs yourself. That works out better than when customs finds it.

What Is Anti-Dumping (in 60 Seconds)

Anti-dumping is not the same as a standard customs duty. The EU uses three separate instruments to correct unfair competition from China. Most importers cannot tell them apart, and pay for it.

Type What it corrects Legal basis China example
Anti-dumping (ADD) Dumping: selling below cost price on the EU market EU Basic Regulation 2016/1036 E-bikes: 9.9% to 70.1%
Anti-subsidy / Countervailing (CVD) State subsidies granted to Chinese producers EU Basic Regulation 2016/1037 E-bikes: 3.9% to 17.2%
Safeguard Sudden surge in imports, regardless of dumping or subsidy WTO Safeguard Agreement + EU Reg. 2015/478 Steel products (EU-wide)

ADD and CVD can apply at the same time, e-bikes carry both. Safeguards cover all countries and require no proof of unfair practice. All three come on top of standard import duties.

Who Gets Hit and Which Products Are on the List (2026)

Stacked coloured steel drums in front of a blue gantry crane under a blue sky.
Stacked drums next to a gantry crane.

Which industries pay the most?

The anti-dumping measures of 2025-2026 do not hit all importers equally. Six sectors are in the line of fire, ranked by average tariff impact and frequency of new measures.

Rank Industry Key measures Tariff range
1 Hospitality / retail ceramic tableware Tableware ADD definitive Feb 2026 (was 13-36% per producer) 79%
2 Chemicals / fine chemicals Phosphorous acid (Mar 2026), fused alumina (Jan 2026), acrylates (under investigation) 88.7-122.8%
3 Automotive aftermarket Steel wheels (Feb 2026, Reg. 2026/428), e-bikes extended, aluminium wheels 22.3-70.1%
4 Furniture & construction imports Plywood/multiplex (long-running), steel fasteners (CN 7318) 43.2-86.8%
5 Micromobility & bicycles E-bikes ADD + CVD (Jan 2025-2030), bicycle extension to 8 countries 9.9-70.1% (+CVD)
6 HVAC / refrigeration Copper pipes (ongoing investigation), F-gas quotas TBD (registration)

The full measures list (May 2026)

Check in TARIC what applies on the date of import.

Product category CN codes ADD range CVD Regulation Valid until
Ceramic tableware (NEW Feb 2026) ex 6911, ex 6912 79.0% - Definitive ADD 7 Feb 2026 2031
Plywood / multiplex ex 4412 31, ex 4412 33 43.2% to 86.8% - EU 2024 extension 2029
Phosphorous acid (NEW Mar 2026) 2811 19 80 (TARIC 2811 19 80 60) 122.8% - Definitive ADD Mar 2026 2031
Steel road wheels (NEW Feb 2026) 8708 70 10/85, 8708 70 99, 8716 90 90 50.3% to 66.4% - (EU) 2026/428 2031
Fused alumina (NEW Jan 2026) various (incl. TRQ duty-free quota) 88.7% to 110.6% - Definitive ADD Jan 2026 2031
E-bikes 8711 60 10, 8711 60 90 9.9% to 70.1% 3.9% to 17.2% (EU) 2025/120 + 2025/114 Jan 2030
Aluminium road wheels ex 8708 70 22.3% - (EU) 2023/112 Jan 2028
Aluminium foil (rolls) ex 7607 11 11, ex 7607 19 10 14.2% to 35.6% - (EU) 2025/1720 Aug 2030
Ceramic tiles ex 6907 13.9% to 69.7% - (EU) 2024/493 Feb 2029
Truck/bus tyres 4011 20 90, ex 4012 12 00 €21.12 to €78.90/tyre - (EU) 2025/58 Jan 2030
Steel fasteners 7318 12 90, 7318 14 91, 7318 15 58 up to 86.5% - (EU) 2022/191 2027
Glass fibre yarns 7019 13 00, ex 7019 19 00 26.3% to 56.1% - (EU) 2025/501 Mar 2030
Glass fibre fabrics 7019 11-15 00 ADD + CVD maintained 5.8% to 10.2% (EU) 2025/2328 + 2025/2337 Nov 2030
Ironing boards 3924 90 00, 8516 79 70 etc. 18.1% to 42.3% - (EU) 2025/2386 Nov 2030
Glyoxylic acid 2918 30 00 29.2% to 124.9% - CATTS Sept 2025 2030
Threaded pipe fittings ex 7307 19 10 14.9% to 57.8% - (EU) 2025/1890 Sept 2030
Stainless steel tube fittings various SS codes 30.7% to 64.9% - 2023 renewal 2028

Solar panels: ADD expired 3 September 2018. A new temporary mechanism was announced in June 2025, check TARIC for current status.

Ongoing investigations under registration (March 2026): mobile cranes ≥30 tonnes (TARIC 8426.49.00.11, 8705.10.00.11), copper pipes (HS 7411.10.90.10), acrylates (TARIC 2916.12.00.15). Registration measures mean the Commission can impose duties retroactively from the registration date if dumping is proven.

What many importers miss

2026: from 13-36% to 79%. Since 7 February 2026 one rate of 79% applies to ceramic tableware from China, instead of the earlier rates of 13 to 36% per producer (check in TARIC how it works now). For a container worth €40,000 that is €31,600 anti-dumping instead of about €8,000: €23,600 more per shipment. Other large increases in 2026: phosphorous acid 122.8% (Mar), steel wheels 50.3-66.4% (Feb, Reg. 2026/428), fused alumina 88.7-110.6% (Jan), plywood up to 86.8%. Goods already on the way paid the new rate from the date of the customs declaration, not from the order date.

Steel screws and bolts (CN 7318) face both anti-dumping and CBAM. You may pay up to 86.5% anti-dumping and also fall under CBAM. Two separate obligations for one product.

Circumvention: "made in Vietnam" or "made in Malaysia" does not protect you. If Chinese producers move production or assembly to another country, the EU extends the anti-dumping measure. Aluminium foil via Thailand now pays the same rate as foil straight from China. Bicycles have been extended to eight countries. And in the ceramic tableware case €15 million was recovered retroactively from circumvention routes.

Without the right papers you pay the residual rate. If the documents are missing, customs will usually apply the residual code, with the highest rate. For e-bikes that is 62.1% instead of 9.9%, for ceramic tableware 79%.

How to Check via TARIC

The official EU consultation tool is at https://ec.europa.eu/taxation_customs/dds2/taric/taric_consultation.jsp. No account required.

1

Find the 8-digit CN code for your product

Use the HS codes lookup tool or ask your customs broker. Example: electric bicycles fall under 8711 60 10 or 8711 60 90.

2

Open the TARIC Consultation Tool

Go to the TARIC tool at the URL above.

3

Enter the CN code in the "Goods code" field

Type your 8-digit CN code into the goods code field.

4

Select the country of origin: choose "China (CN)"

This activates all China-specific measures in the results.

5

Click "Display Measures"

TARIC shows all applicable measures: type (anti-dumping, anti-subsidy, safeguard), legal basis and regulation reference.

6

Read the additional codes

If ADD applies, TARIC shows a list of 4-digit codes linked to specific Chinese exporters. Each code carries a different rate.

7

Identify your supplier's code

Ask your Chinese supplier: "Is your company listed in Annex I of [regulation]? If so, what is your TARIC additional code?" Without this answer, you will pay the highest available rate.

If you have the HS code found by Import8, it does steps 1 to 6 and you see for each product whether anti-dumping applies.

TARIC Additional Codes Explained

A TARIC additional code is a 4-character alphanumeric code (such as B351, C303 or B999). You add it to the 10-digit TARIC code in your customs declaration. Customs uses it to determine which ADD rate applies to your specific supplier.

How it works:

  • Supplier-specific codes (B351, C303, etc.): Assigned to Chinese companies that actively cooperated with the ADD investigation and were sampled. They pay their individually determined rate, typically the lowest available.
  • Non-sampled cooperating company codes: Suppliers that cooperated but were not selected for sampling. They pay a weighted average rate and receive their own code.
  • Residual code (usually B999): for all Chinese exporters not named in the regulation. This is always the highest rate.

Why this means tens of thousands of euros:

For e-bikes (CN 8711 60 10, Regulation (EU) 2025/120), the rate ranges from 9.9% for sampled companies to 62.1% for the residual category (plus 17.2% CVD). Without the correct additional code, customs automatically applies B999.

How to ask your supplier (use this template)

"For our customs declaration in the EU, we need your TARIC additional code under Regulation (EU) 2025/[number]. Please confirm: (1) whether your company is listed in Annex I of this regulation, (2) your specific additional code, and (3) whether your commercial invoices include the required manufacturer declaration."

Concrete €-impact per product group

The additional code is not an administrative detail; it is your margin. Three examples from 2026 measures:

Product group Container value With individual code With B999 / residual Difference
Ceramic tableware €40,000 ~€3,200 (8% indicative)¹ €31,600 (79%) €28,400
Phosphorous acid (20 t × €1,200) €24,000 purchase value n/a: no lower rate €29,472 (122.8%) €29,472 / month
Fused alumina (within TRQ vs. outside) €50,000 €0 (TRQ duty-free) €44,350 to €55,300 (88.7-110.6%) €44,350+
E-bikes (500 units × €400) €200,000 €20,600 (10.3%) €124,200 (62.1%) €103,600

¹ Lowest rate before February 2026 (13 to 36%). Since 7 February 2026, 79% applies to all suppliers and there is no lower rate per supplier any more. Check TARIC for how it works now.

When does customs apply B999 (residual)?

  1. Your supplier is not listed in the annex of the ADD regulation.
  2. The commercial invoice does not contain a valid supplier declaration with the additional code.
  3. You are working with a middleman who conceals the actual manufacturer.

Worked Example: 500 E-Bikes from China

Situation: You import 500 electric bicycles from a Chinese supplier. Invoice value: 500 × €400 = €200,000. CN code: 8711 60 10. Measure: (EU) 2025/120 + 2025/114.

Scenario A: with correct additional code (10.3% ADD)

Invoice value:           €200,000
ADD (10.3%):           +  €20,600
CVD (3.9%):            +   €7,800
Standard import duty:  +       €0
                       ──────────
Total additional cost:    €28,400

Scenario B, without code or B999 (62.1% ADD + 17.2% CVD)

Invoice value:           €200,000
ADD (62.1%):           + €124,200
CVD (17.2%):           +  €34,400
Standard import duty:  +       €0
                       ──────────
Total additional cost:   €158,600

Difference: €130,200, on a single shipment of 500 units.

This is not a theoretical scenario. The residual rate applies to all suppliers not listed in the regulation. Customs assigns it automatically when the invoice does not contain a valid additional code.

What must appear on the commercial invoice

"The undersigned declares that the goods were manufactured by [name and address of manufacturer] in China, TARIC additional code [BXXX], Regulation (EU) 2025/120." Without this declaration: B999.

Penalties and Surcharges

Using the wrong code without intent is not a defence. Customs assesses based on what is in the declaration, not on what you knew.

Legal basis Regulation Effect
UCC Art. 42 (EU-wide) Regulation (EU) 952/2013 Member States required to impose "effective, proportionate and dissuasive" penalties
UCC Art. 114 (EU-wide) Regulation (EU) 952/2013 Surcharge including interest over the retroactive period
UCC Art. 77 Regulation (EU) 952/2013 EU importer is the customs debtor, the bill lands with you, even when your supplier circumvents
Art. 9:1a General Customs Act (NL) In force 1 July 2024 Enhanced penalty provisions for customs violations
Art. 9:1b General Customs Act (NL) In force 1 July 2024 Intentional evasion: higher penalty scale

Concrete risks

1.

Surcharge: All unpaid ADD is recovered retroactively, plus interest (UCC Art. 114).

2.

Penalty: Member State-specific. NL has enhanced provisions from 1 July 2024.

3.

Losing your authorisations: repeated violations can lead to your AEO status or simplified procedures being withdrawn.

4.

OLAF investigation: Suspected intentional fraud may trigger the European anti-fraud office.

Registration period: When the Commission opens an ADD investigation, it can require importers to register goods. If definitive ADD follows, it can be imposed retroactively over the registration period.

Anti-Circumvention: ADD via Third Countries

When Chinese producers avoid ADD by moving production or assembly to third countries (Vietnam, Malaysia, Thailand, Cambodia), the EU extends the measure via an anti-circumvention investigation. Legal basis: Article 13 of EU Basic Regulation 2016/1036.

What the Commission looks at: among other things the value added in the other country, the trade pattern and whether the circumvention undermines the measure. A threshold of about 25% of the production costs is often used, but it is not the only criterion. If circumvention is established, the anti-dumping can be extended to that country.

Four verified examples

1. Aluminium foil via Thailand

Chinese producers exported aluminium foil to Thailand for minor processing, then re-exported to the EU without paying ADD. The Commission confirmed circumvention and extended the 35.6% rate to Thailand via (EU) 2025/1720.

2. Steel fasteners via Malaysia

ADD on Chinese steel screws and bolts (CN 7318) extended to imports from Malaysia via (EU) 2020/611. Imports "consigned from Malaysia, whether declared as originating in Malaysia or not" fall under the measure.

3. Bicycles via eight countries

Anti-dumping on Chinese bicycles has been extended to Indonesia, Malaysia, Sri Lanka, Tunisia, Cambodia, Pakistan and the Philippines.

4. Retroactive recovery: €15 million in the ceramic tableware case

In a Commission investigation into Chinese tableware exporters who evaded EU duties via other countries, it was found that €15 million in duties must be collected retroactively. Under UCC Art. 77 the importer in the EU is the customs debtor. A review of earlier declarations can therefore lead to a claim with interest months or years later. A worked example: someone who imported 50 shipments of €30,000 in a year at 20% could get a claim of €600,000 after such a procedure if the rate turns out to be 80%.

What this means for you: "made in Vietnam" or "made in Malaysia" on a product that really comes from China does not protect you. Ask for proof of origin and production: a certificate of non-preferential origin, production records (bill of materials, processing steps, energy use per unit) and supplier declarations. Check whether the country of shipment falls under an extension or registration for your product.

5-Step Action Plan for Importers

Do this this week:

1

List your top-10 Chinese import CN codes

Check your customs declarations from the past 12 months.

2

Run a TARIC check per code

Or use Import8 to do this automatically for your entire product list.

3

If ADD applies: ask your supplier for the additional code

Plus confirmation that their company is listed in the regulation annex.

4

Update your commercial invoice template

Add a placeholder for the TARIC additional code and supplier declaration.

5

Spot-check the last three months of declarations

Consider proactively contacting customs if you find errors, a voluntary disclosure is treated more favourably than a detected violation.

Frequently Asked Questions

The normal import duty (MFN) applies to all countries the EU has no trade agreement with. Anti-dumping is an extra duty for certain products from certain countries, when the EU finds that they are dumped. So you pay both, and sometimes also a countervailing duty (CVD) if there are state subsidies.

Find the 8-digit CN code for your product using the HS codes tool and enter it in the TARIC Consultation Tool, with China as the country of origin. If TARIC returns a measure of the type "Anti-dumping duty", your product is affected. Import8 runs this check automatically during classification.

An additional code is a 4-character code, such as B351 or B999. It tells customs which Chinese company the goods come from and which anti-dumping rate applies. Without the right code customs uses the residual code (B999): the highest rate, for everyone not listed separately in the regulation.

That is a bad sign. Either the company is not in the regulation and falls under the residual rate, or it knows the rate is high and does not want to put you off. Either way you pay the residual rate at the border. Look for another supplier or ask a customs adviser.

It depends on the product. The EU has extended anti-dumping to other countries for a number of product groups, after investigating circumvention. Aluminium foil via Thailand, steel fasteners via Malaysia and bicycles via eight countries already fall under it. In the ceramic tableware case €15 million was recovered retroactively. That can happen for other product groups too.

For the claim itself customs does not care whether it was deliberate: unpaid anti-dumping is always recovered, with interest (UCC Art. 114). Fines differ per country. In the Netherlands stricter rules apply since 1 July 2024 (Art. 9:1a and 9:1b General Customs Act). For deliberate or repeated evasion, OLAF can prosecute.

ADD measures typically last five years, after which a sunset review takes place. If the Commission determines that dumping is likely to recur, they are renewed, again for five years. Some measures have been active since 2016 (steel fasteners).

Click the regulation reference in TARIC to link through to EUR-Lex. There you find Annex I with company names, additional codes and applicable rates. Search for your supplier's name in that table. If they are not listed: residual rate applies.

Want to know whether your products are subject to anti-dumping duties?

Import8 finds the HS code of your product and shows which EU rules (anti-dumping, CBAM, GPSR) go with that code.

View required documents

Further reading: Understanding HS codes and CN codes · CBAM: the carbon border adjustment · TARIC codes explained

Sources

The following official sources form the basis for the claims on this page. Verification date: 22 May 2026.

Verified 22 May 2026. Anti-dumping measures change regularly: rates, expiry dates and additional codes may have changed after this date. Check TARIC for current status at the time of import. Not legal or fiscal advice.

What next

Want to know if your shipment is right? Have the documents checked before they reach customs.

Check a shipment

Upload the invoice, packing list and the other papers of one shipment. For each document you see what is wrong, what is missing and what your supplier must change.

Find an HS code

Describe your product or upload a photo. You get the HS or TARIC code and the reason for it.

Look up documents by HS code

Enter an HS code and see which EU rules apply, such as CBAM, GPSR, REACH or anti-dumping, with the text from EUR-Lex.

Import8

Welcome back

Log in to your account

Forgot password?

Don't have an account?

Import8

Create your account

Start with 5 free credits

What kind of organisation are you? (optional)
How many shipments per month? (optional)

Already have an account?